Plug one side of this clever digital system in to you standard passive vocal mic and the other into your mixing desk or speaker to get crystal clear, wireless, digital signal.
This system is ideal to add to microphones such as the Shure SM58, SM57 or Shure Beta 58 etc and will instantly give you 2.4Ghz wireless in a rugged, rechargeable package.
This system even comes with a camera hot shoe mount to allow you to mount your mic to your digital SLR etc.
Simplifying the wireless microphone approach, the NUX B3 is a hard wearing, 2.4GHz wireless snap on microphone system, delivering clear audio from your favourite wired dynamic mics, without the use of cables.
Simple and intuitive to use, and with very little setup required, operation is simply set the receiver and transmitter to the same channel, and once the RF LEDs turn blue, hey presto, you're paired! The NUX B3 also features 6 channels (channel 1 is the default pairing), enabling the use of multiple systems without conflict.
The NUX B3 delivers wireless mic signals at up to 30m range with <4ms latency and 48kHz - 32-bit audio quality, providing an effective means for wireless mic setups without breaking the bank. The device will even power itself down when not in use due to an auto-sleep energy saving mode, so you needn't worry about it letting you down on a stretch of shows with up to 5 hours battery life off a single charge.
- 2.4GHz interference-free carrier
- 48kHz - 32-bit audio quality
- Up to 30 metres range
- Up to 5 hours operation off a single charge
- USB rechargeable Li-ion battery
- <4 ms latency
- Auto-sleep energy saver mode
- Supplied with hot-shoe camera mount and XLR - 3.5mm cable
- For use with dynamic microphones (no phantom power)